-
- Release on2019-09-06
- We often compare the crystal oscillator to the heart of the digital circuit. This is because all the work of the digital circuit is inseparable from t......Read More>>
-
- Release on2019-09-05
- PCB board features Can be high density. For decades, the high density of printed boards has grown with the increased integration of integrated circuit......Read More>>
-
- Release on2019-09-04
- Crimp pin A pin having a specially shaped cross section designed to be pressed into a metallized hole without the need for additional soldering.PCB De......Read More>>
-
- Release on2019-09-03
- Without impedance control, considerable signal reflections and signal distortions are induced, resulting in design failure. Common signals, such as PC......Read More>>
-
- Release on2019-09-02
- Speaking of the difficult problem of switching power supply, PCB layout problem is not very difficult, but if you want to lay out a good PCB board, it......Read More>>
-
- Release on2019-08-30
- With the development of new energy intelligent network technology, automotive design is no longer a conventional 12V system. On the one hand, high vol......Read More>>
-
- Release on2019-08-29
- The reason for using patch beads and chip inductors is whether the use of chip beads or chip inductors is mainly in applications. A chip inductor is r......Read More>>
-
- Release on2019-08-28
- 1. Description of the problem: For a driving recorder, an external adapter should be added during the test. When the machine is powered on, the test i......Read More>>
-
- Release on2019-08-27
- In RF design, the electromagnetic properties at the interconnection point are one of the main problems facing engineering design. This article describ......Read More>>
-
- Release on2019-08-26
- Due to its flexible processing, high-precision machining and flexible and controllable machining processes, UV laser processing systems have become th......Read More>>
-
- Release on2019-08-24
- A PCB as an integral part of the whole machine generally cannot constitute an electronic product, and there must be a problem of external connection. ......Read More>>
-
- Release on2019-08-23
- Baking can eliminate the internal stress of the PCB, which is to stabilize the size of the PCB. The baked board has a relatively large improvement in ......Read More>>
-
- Release on2019-08-22
- Technology in almost all of the world's leading industries has shown signs of growth. One of them is the upgrade of mobile technology, and many new re......Read More>>
-
- Release on2019-08-21
- As the global PCB industry manufacturing sector is further concentrated in China, the proportion of China's PCB production value to the world will con......Read More>>
-
- Release on2019-08-20
- In life, at work, we always complain about some bad things, but most people just complain about the two sentences and continue to do their work. Of co......Read More>>
-
- Release on2019-08-19
- PCB copper wire off (also known as beryllium copper), each PCB brand will be said to be a laminate problem, requiring its production plant to bear bad......Read More>>
-
- Release on2019-08-16
- In thermal design, PCB is the most important heat source, and there are three main sources of heat: (1) Heating of electronic components (2) The heat ......Read More>>
-
- Release on2019-08-15
- SMT red plastic double-sided patch over reflow soldering furnace has two processes One is double-sided solder paste, one side of solder paste, one sid......Read More>>
-
- Release on2019-08-14
- The serpentine line is a kind of routing method often used in the PCB wiring process. Its main purpose is to adjust the delay and meet the system timi......Read More>>
-
- Release on2019-08-13
- In the PCB manufacturing process, PCB process boards often encounter some process defects, such as poor copper wire on the PCB circuit board (also kno......Read More>>
- Contact Us
-
TEL: + 86-13428967267
FAX: + 86-4008892163-239121
+ 86-2028819702-239121
Email: sales@o-leading.com
Contact Now
- Certifications
-
- Subscribe
-
Get email updates on new products
- New Products
- Electronic album
