- Browse Categories
- Hot products(227)
- Multilayer PCB(124)
- Double-side pcb(98)
- single layer pcb(5)
- PCB Application Fields(32)
- 3D printer PCB(13)
- Controller PCB(4)
- Automotive PCB(12)
- Boys sensor(3)
- PCB Brand(21)
- Philips PCB(2)
- SOCOMEC PCB(2)
- Magana PCB(2)
- Emerson PCB(4)
- EBM PCB(5)
- BCE PCB(2)
- ESBI PCB(4)
- Special Material PCB(51)
- Special tech PCB(47)
- Carbon Printed PCB(3)
- Plug Via holes(6)
- Via-In-Pad(3)
- Peelable Mask(3)
- Sink holes(17)
- Edge Plating(10)
- Hard Gold PCB(5)
- HDI PCB(25)
- PCBA(51)
- Rigid-Flexible PCB(36)
- Ceramic and Matel Base pcb(25)
- Contact us
- TEL: + 86-13428967267FAX: + 86-4008892163-239121
+ 86-2028819702-239121
Email: [email protected]
Contact Now
- Certifications
- Subscribe
-
Get email updates on new products
- New Products
- Electronic album
Double sided pcb manufacturer china, PCB with imedance control
- Layers: 2
- Material: FR4
- Finished Thickness: 1.57mm +/- 10%
- Outer Layer Copper Thickness: 1oz
- Finish: ENIG (Au:2-5u")
- Soldermask (Color): Both Sides, LPI (Black)
- Silkscreen (Color): Both Sides, White
Layers: 2
Material: FR4
Finished Thickness: 1.57mm +/- 10%
Outer Layer Copper Thickness: 1oz
Finish: ENIG (Au:2-5u")
Soldermask (Color): Both Sides, LPI (Black)
Silkscreen (Color): Both Sides, White
Electrical test
FINISH: THIS BOARD SHALL BE IMMERSION GOLD PLATED ACCORDING TO IPC-6012.
THICKNESS SHALL BE .050uM OVER 3-6uM NICKEL.
COPPER PLATE HOLES MINIMUM .025 AVG, .020 MIN.. HOLES MAY NOT BE PLUGGED, EXCEPT VIAS .500 FINISH OR SMALLER.
Layer Key:
==========
*.GM4: Board Outline
*.TXT: NC Drill File
*.GTP: Top Paste
*.GTO: Top Silkscreen
*.GTS: Top Soldermask
*.GTL: Top Copper Layer
*.GBL: Bottom Copper Layer
*.GBS: Bottom Soldermask
*.GBO: Bottom Silkscreen
*.GBP: Bottom Paste
Material: FR4
Finished Thickness: 1.57mm +/- 10%
Outer Layer Copper Thickness: 1oz
Finish: ENIG (Au:2-5u")
Soldermask (Color): Both Sides, LPI (Black)
Silkscreen (Color): Both Sides, White
Electrical test
FINISH: THIS BOARD SHALL BE IMMERSION GOLD PLATED ACCORDING TO IPC-6012.
THICKNESS SHALL BE .050uM OVER 3-6uM NICKEL.
COPPER PLATE HOLES MINIMUM .025 AVG, .020 MIN.. HOLES MAY NOT BE PLUGGED, EXCEPT VIAS .500 FINISH OR SMALLER.
Layer Key:
==========
*.GM4: Board Outline
*.TXT: NC Drill File
*.GTP: Top Paste
*.GTO: Top Silkscreen
*.GTS: Top Soldermask
*.GTL: Top Copper Layer
*.GBL: Bottom Copper Layer
*.GBS: Bottom Soldermask
*.GBO: Bottom Silkscreen
*.GBP: Bottom Paste
Tag: