- お問い合わせ
-
TEL:+ 86-13428967267
FAX:+ 86-4008892163-239121
+ 86-2028819702-239121
メールアドレス:sales@o-leading.com
今コンタクトしてください
- 認証
-
- 申し込む
-
新製品の最新情報をメールで受け取る
- 新製品
HDI pcb Printed circuit board, china pcb manufacture
- Layer count: 18L
- materials: M6
- Board thickness: 3.0+/-0.3mm
- Finishing Size: 210x395.2mm
- Min Line w/s: 3.2/3.5mil
- Min drill size [FHS/DHS] : 0.20mm/0.30mm
- Plating AR DHS : 11.7:1
- Hard gold thickness: 4UM
- Surface finish: ENIG
- Impedance: Tol: +/-7%, the deviation of the impedance in the same layer must not exceed +/- 2Ohm
- Other : Back drill, Rotated 7 degree.
COPPER PLATE HOLES MINIMUM .025 AVG, .020 MIN.. HOLES MAY NOT BE PLUGGED
•Special requirement:ENIG, Hard gold thickness: 4UM, Impedance: Tol: +/-7%, the deviation of the impedance in the same layer must not exceed +/- 2Ohm, Back drill, Rotated 7 degree.
Pack with colorless transparent bubble film ,25 PCS/ bag, put desiccant in flank, put humidity indicator card on top side
Layer structure




•Special requirement:ENIG, Hard gold thickness: 4UM, Impedance: Tol: +/-7%, the deviation of the impedance in the same layer must not exceed +/- 2Ohm, Back drill, Rotated 7 degree.
Pack with colorless transparent bubble film ,25 PCS/ bag, put desiccant in flank, put humidity indicator card on top side
Layer structure



